Crankshaft Position Sensor: Testing and Inspection

2GR-FE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: INSPECTION

1. INSPECT CRANKSHAFT POSITION SENSOR

(a) Measure the resistance according to the value(s) in the table below.





Standard resistance:





NOTICE:
* "Cold" and "Hot" mean the temperature of the coils themselves.
* "Cold" is from -10°C (14°F) to 50°C (122°F) and "Hot" is from 50°C (122°F) to 100°C (212°F).
(b) If the resistance is not as specified, replace the crankshaft position sensor.