Installation

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION RECEIVER: INSTALLATION

1. INSTALL NO. 2 RADIO BRACKET

(a) Install the bracket with the 4 screws.

Torque : 2.5 Nm (25 kgf-cm, 22 in-lbf)

2. INSTALL NO. 1 RADIO BRACKET

(a) Install the bracket with the 4 screws.

Torque : 2.5 Nm (25 kgf-cm, 22 in-lbf)

3. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET

(a) Connect the connectors.

(b) Insert the navigation receiver as shown in the illustration to attach the 6 clips on its backside.

NOTICE:
When inserting the navigation receiver, do not press the knobs on it.





(c) Install the navigation receiver with the 4 bolts.

Torque : 2.5 Nm (25 kgf-cm, 22 in-lbf)

4. INSTALL HEATER CONTROL ASSEMBLY Installation

5. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

6. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation