Reassembly

DOOR / HATCH: HOOD: REASSEMBLY

NOTICE:
When installing the hood bulge protector, heat the hood bulge surface using a heat light.

Standard:

NOTICE:
Do not heat the hood bulge excessively.

1. INSTALL HOOD SUPPORT ASSEMBLY LH Installation

2. INSTALL HOOD SUPPORT ASSEMBLY RH

HINT
Use the same procedure described for the LH side.

3. CONNECT WASHER HOSE ASSEMBLY

(a) Attach the 5 clamps and connect the washer hose assembly.

4. INSTALL WASHER NOZZLE SUB-ASSEMBLY Installation

5. INSPECT WASHER NOZZLE SUB-ASSEMBLY Washer Nozzle (for Front Side)

6. ADJUST WASHER NOZZLE SUB-ASSEMBLY Washer Nozzle (for Front Side)

7. INSTALL NO. 3 HOOD BULGE PROTECTOR (w/ Hood Bulge)

(a) When using a new hood bulge:

(1) Clean the hood bulge surface.

(2) Using a heat light, heat the hood bulge surface.

(b) When reusing the hood bulge:

(1) Using a heat light, heat the hood bulge surface.

(2) Remove the double-sided tape from the hood bulge.

(3) Wipe off any tape adhesive residue with cleaner.

(c) Install a new No. 3 hood bulge protector as shown in the illustration.

Text in Illustration

8. INSTALL NO. 2 HOOD BULGE PROTECTOR (w/ Hood Bulge)

(a) When using a new hood bulge:

(1) Clean the hood bulge surface.

(2) Using a heat light, heat the hood bulge surface.

(b) When reusing the hood bulge:

(1) Using a heat light, heat the hood bulge surface.

(2) Remove the double-sided tape from the hood bulge.

(3) Wipe off any tape adhesive residue with cleaner.

(c) Install 2 new No. 2 hood bulge protectors as shown in the illustration.

Text in Illustration

9. INSTALL NO. 1 HOOD BULGE PROTECTOR (w/ Hood Bulge)

(a) When using a new hood bulge:

(1) Clean the hood bulge surface.

(2) Using a heat light, heat the hood bulge surface.

(b) When reusing the hood bulge:

(1) Using a heat light, heat the hood bulge surface.

(2) Remove the double-sided tape from the hood bulge.

(3) Wipe off any tape adhesive residue with cleaner.

(c) Install a new No. 1 hood bulge protector as shown in the illustration.

Standard:

10. INSTALL HOOD AIR INTAKE GUIDE (w/ Hood Bulge)

(a) Attach the 4 claws to install the hood air intake guide to the bulge.

11. INSTALL HOOD BULGE (w/ Hood Bulge)

(a) Attach the 3 claws to install the hood bulge together with the intake guide.

(b) Attach the 3 clips.

12. INSTALL HOOD INSULATOR (w/ Hood Insulator)

(a) Attach the 2 claws.

(b) Install the hood insulator with the 10 clips.

13. INSTALL HOOD TO RADIATOR SUPPORT SEAL

(a) Attach the 7 clips to install the hood to radiator support seal.