Reassembly

INTERIOR PANELS / TRIM: FRONT CONSOLE BOX (for 1GR-FE): REASSEMBLY

1. INSTALL TRANSFER POSITION SWITCH (for VF4BM)

2. INSTALL NO. 2 BOX BOTTOM MAT (for 2WD)

(a) Attach the 4 claws to install the No. 2 box bottom mat.

3. INSTALL FRONT UPPER CONSOLE PANEL GARNISH





(a) for VF2A:

(1) Attach the 6 claws to install the front upper console panel garnish.

Text in Illustration





(b) for 2WD, for VF4BM:

(1) Attach the 10 claws to install the front upper console panel garnish.





Text in Illustration





4. INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY (for VF2A)

(a) Attach the 6 claws to install the shifting hole cover.

5. INSTALL SWITCH BASE

(a) Install the switch base with the 2 screws.

6. INSTALL BACK DOOR POWER WINDOW REGULATOR SWITCH ASSEMBLY Installation

7. INSTALL CONSOLE CUP HOLDER BOX

(a) Install the console cup holder with the 6 screws.

8. INSTALL CONSOLE BOX REGISTER ASSEMBLY

(a) Attach the 4 claws to install the console box register.

9. INSTALL REAR CONSOLE END PANEL

(a) Attach the 4 clips and 4 claws to install the rear console end panel.

10. INSTALL CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY

(a) Install the console compartment door hinge with the 4 screws.

(b) Attach the 6 claws to install the console compartment inner door.

(c) Install the 4 screws.

(d) Install the console compartment door lock with the 2 screws.

11. INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY

(a) Install the console compartment door with the 6 screws.