Main Relay (Computer/Fuel System): Testing and Inspection

1GR-FE ENGINE CONTROL: RELAY: ON-VEHICLE INSPECTION

1. INSPECT CIRCUIT OPENING RELAY (C/OPN)

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





If the result is not as specified, replace the circuit opening relay.

2. INSPECT NO. 1 INTEGRATION RELAY (IG2)

(a) Check the IG2 fuse.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





If the result is not as specified, replace the IG2 fuse.

(b) Check the IG2 relay.

(1) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





Text in Illustration





If the result is not as specified, replace the No. 1 integration relay.

3. INSPECT NO. 1 INTEGRATION RELAY (EFI)

(a) Check the EFI fuse.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





If the result is not as specified, replace the EFI fuse.

(b) Check the EFI relay.

(1) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





Text in Illustration





If the result is not as specified, replace the No. 1 integration relay.

4. INSPECT NO. 1 INTEGRATION RELAY (A/F)

(a) Check the A/F fuse.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





If the result is not as specified, replace the A/F fuse.

(b) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





Text in Illustration





If the result is not as specified, replace the No. 1 integration relay.

5. INSPECT MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK)

NOTICE:
The ACC relay and IG1 No. 1 relay are built into the main body ECU (driver side junction block).

(a) Inspect the ACC relay.

(1) Measure the resistance according to the value(s) in the table below.





Text in Illustration





Standard Resistance:





If the result is not as specified, replace the main body ECU.

(b) Inspect the IG1 No. 1 relay.

(1) Measure the resistance according to the value(s) in the table below.





Text in Illustration





Standard Resistance:





If the result is not as specified, replace the main body ECU.