Removal

PARK ASSIST / MONITORING: CLEARANCE WARNING ECU: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE DOOR SCUFF PLATE ASSEMBLY LH Removal

3. REMOVE COWL SIDE TRIM BOARD LH Removal

4. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

6. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY Removal

7. REMOVE CLEARANCE WARNING ECU ASSEMBLY





(a) Disconnect the connector.

(b) Remove the bolt and clearance warning ECU.