Ball Joint
FRONT NO. 1 SUSPENSION LOWER ARM SUB-ASSEMBLY LHUsing a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take a torque reading on the 5th turn.
Standard turning torque 0.29 to 2.94 N*m (2.96 to 30.0 kgf*cm, 2.57 to 26.02 in.*lbf) or less
FRONT SUSPENSION UPPER ARM ASSEMBLY LH
Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take a torque reading on the fifth turn.
Standard turning torque 0.98 to 4.41 N*m (1.0 to 45 kgf*cm, 9 to 39 in.*lbf)