Indicator Circuit

PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: Indicator Circuit
- Indicator Circuit

DESCRIPTION

The warning indicator lights are installed in the telltale light assembly.

WIRING DIAGRAM





INSPECTION PROCEDURE

NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (TELLTALE LIGHT - BATTERY)

(a) Disconnect the F32 telltale light assembly connector.





(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:





Text in Illustration





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

2. CHECK HARNESS AND CONNECTOR (CLEARANCE WARNING ECU - TELLTALE LIGHT)

(a) Disconnect the F25 clearance warning ECU connector.

(b) Disconnect the F32 telltale light assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

3. INSPECT TELLTALE LIGHT ASSEMBLY

(a) Remove the telltale light assembly Removal.





(b) Check if the illumination for the telltale light assembly comes on.

OK:

for A
for B
for C
for D


















NG -- REPLACE TELLTALE LIGHT ASSEMBLY Removal

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Intuitive Parking Assist System