Rear View Monitor System (w/ Navigation System)

PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM (w/ Navigation System): HOW TO PROCEED WITH TROUBLESHOOTING

HINT
Use these procedures to troubleshoot the rear view monitor system.

1. VEHICLE BROUGHT TO WORKSHOP

NEXT -- Continue to next step.

2. CUSTOMER PROBLEM ANALYSIS

NEXT -- Continue to next step.

3. CHECK DTC OF NAVIGATION SYSTEM

(a) Refer to DTC Check/Clear procedures for the navigation system Reading and Clearing Diagnostic Trouble Codes.

Result





B -- GO TO NAVIGATION SYSTEM Navigation System
A -- Continue to next step.

4. PROBLEM SYMPTOM CONFIRMATION

(a) Problem symptom confirmation.

Result





B -- Go to step 6
A -- Continue to next step.

5. SYMPTOM SIMULATION

NEXT -- Continue to next step.

6. CHECK IF SAME SYMPTOM APPEARS IN NAVIGATION SYSTEM

(a) Refer to Navigation System Symptom Related Diagnostic Procedures.

Result





B -- FOLLOW THE NAVIGATION SYMPTOM CHART TO PERFORM TROUBLESHOOTING
A -- Continue to next step.

7. PROBLEM SYMPTOMS TABLE

(a) Refer to Problem Symptoms Table Rear View Monitor System (w/ Navigation System).

Result





B -- Go to step 9
A -- Continue to next step.

8. BASED ON MALFUNCTION SYMPTOM, PERFORM TROUBLESHOOTING BELOW

(a) Terminals of ECU Rear View Monitor System (w/ Navigation System).

NEXT -- Continue to next step.

9. ADJUST, REPAIR OR REPLACE

NEXT -- Continue to next step.

10. CONFIRMATION TEST

NEXT -- END