U0129

METER: METER / GAUGE SYSTEM: U0100,U0129,U0151: Lost Communication with ECM / PCM "A"
U0151 - Lost Communication with Airbag ECU

DESCRIPTION

The combination meter communicates with the ECM, skid control ECU and center airbag sensor via the CAN communication system.





INSPECTION PROCEDURE

PROCEDURE

1. CONFIRM DTC OUTPUT

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Combination Meter / Trouble Codes.

(e) Clear DTCs Reading and Clearing Diagnostic Trouble Codes.

(f) Drive the vehicle at more than 5 km/h (3.1 mph) for at least 60 seconds.

(g) Stop the vehicle.

(h) Check DTCs Reading and Clearing Diagnostic Trouble Codes.

Result





HINT
If CAN communication system DTC U0100, U0129 or U0151 and another DTC are output at the same time, perform troubleshooting for CAN communication system DTC U0100, U0129 or U0151 first.

B -- USE SIMULATION METHOD TO CHECK How To Proceed With Troubleshooting

A -- GO TO CAN COMMUNICATION SYSTEM How to Proceed With Troubleshooting