Pinout Values and Diagnostic Parameters

DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM: TERMINALS OF ECU

1. CHECK MAIN BODY ECU









(a) Disconnect the main body ECU connectors.

(b) Measure the voltages of the wire harness side connectors.

Standard voltage:





If the result is not as specified, there may be a malfunction in the wire harness.

(c) Reconnect the main body ECU connectors.

(d) Measure the voltage of the wire harness side connectors.

Standard voltage:





If the result is not as specified, there may be a malfunction in the wire harness.

2. CHECK DOOR CONTROL RECEIVER





(a) Disconnect the door control receiver connector.

(b) Measure the voltage and resistance of the wire harness side connector.

Standard:





If the result is not as specified, there may be a malfunction in the wire harness.

(c) Reconnect the door control receiver connector.

(d) Measure the voltage of the wire harness side connector.

Standard voltage:





If the result is not as specified, there may be a malfunction in the wire harness.