Disassembly

SEAT: REAR SEAT ASSEMBLY (for LH Side): DISASSEMBLY

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

1. REMOVE REAR SEAT CUSHION HINGE SUB-ASSEMBLY





HINT
Use the same procedure for both sides.

(a) Remove the bolt.

(b) Disengage the hook and remove the rear seat cushion hinge.

2. REMOVE REAR SEAT CUSHION UNDER COVER

(a) Remove the rear seat cushion stopper from the rear seat cushion cover band and the slit of the rear seat cushion under cover.





Text in Illustration





(b) Using a clip remover, remove the 5 clips and the rear seat cushion under cover.

3. REMOVE REAR SEAT CUSHION STOPPER

(a) Remove the screw and the rear seat cushion stopper.





4. REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY

(a) Disengage the hook and remove the rear seat cushion frame.





5. REMOVE REAR SEAT CUSHION COVER

(a) Remove the 10 hog rings and the rear seat cushion cover.





6. REMOVE REAR SEAT HEADREST ASSEMBLY

(a) Push the lock button of the rear seat headrest support and remove the rear seat headrest.

7. REMOVE REAR SEAT HEADREST HANDLE

(a) Using a screwdriver with its tip wrapped in protective tape, disengage the snap ring and remove the rear seat headrest handle.





Text in Illustration





8. REMOVE REAR SEATBACK LOCK COVER

(a) Remove the screw.





(b) Disengage the guide and remove the rear seat back lock cover.

9. REMOVE TETHER ANCHOR COVER

(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and open the cover.





Text in Illustration





(b) Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the tether anchor cover.





Text in Illustration





10. REMOVE REAR SEAT HEADREST SUPPORT

(a) Remove the 14 hog rings.





(b) Disengage the 2 claws and remove the rear seat headrest support.





HINT
Use the same procedure for both sides.

11. REMOVE REAR SEATBACK LOCK RELEASE BUTTON

(a) Remove the rear seatback lock release button.





12. REMOVE REAR SEATBACK STOP BUTTON GROMMET

(a) Disengage the 2 claws and remove the rear seatback stop button grommet.





13. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY

(a) Remove the rear seatback frame.





14. REMOVE REAR SEATBACK LOCK ASSEMBLY

(a) Remove the 2 bolts and the rear seatback lock.





15. REMOVE REAR SEATBACK COVER

(a) Pass the hook of the rear seatback cover through the slit in the rear seatback pad.





(b) Remove the 8 hog rings and the rear seatback cover.