Reading and Clearing Diagnostic Trouble Codes

CRUISE CONTROL: CRUISE CONTROL SYSTEM: DTC CHECK / CLEAR

1. DTC CHECK

(a) Connect a Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the tester ON.

(d) Enter the following menus: Powertrain / Cruise Control / Trouble Codes.

(e) Read the DTCs.

2. CLEAR DTC

(a) Connect a Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the tester ON.

(d) Enter the following menus: Select: Powertrain / Cruise Control / Trouble Codes.

(e) Erase the DTCs.