Installation

METER: COMBINATION METER: INSTALLATION

1. INSTALL COMBINATION METER ASSEMBLY

(a) Connect the 2 connectors and the clamp.





(b) Install the combination meter assembly with the 4 screws.





Torque : 7.0 Nm (71 kgf-cm, 62 in-lbf)

2. INSTALL INSTRUMENT CLUSTER FINISH PANEL Installation

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH Installation

4. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Installation

5. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

6. INSTALL INSTRUMENT PANEL GARNISH LH Installation

7. INSTALL COWL SIDE TRIM BOARD LH





(a) Engage the 2 claws and install the cowl side trim board.

(b) Install the clip.

8. INSTALL FOOTREST CLIP Installation

9. INSTALL FRONT FLOOR FOOTREST Installation

10. INSTALL FRONT DOOR SCUFF PLATE LH





(a) Engage the 14 claws and install the door scuff plate.

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 3.9 Nm (40 kgf-cm, 35 in-lbf)