Disassembly

AXLE: FRONT AXLE HUB: DISASSEMBLY

1. REMOVE NO. 2 SKID CONTROL SENSOR CLAMP





(a) Remove the bolt and the No. 2 skid control sensor clamp from the steering knuckle.

2. REMOVE KNUCKLE GREASE RETAINER CAP (for 2WD)





(a) Using a screwdriver and hammer, remove the retainer cap.

3. REMOVE STEERING KNUCKLE OIL SEAL (for 4WD)





(a) Using a screwdriver and hammer, remove the oil seal.

4. REMOVE FRONT AXLE HUB





(a) Remove the 4 bolts, axle hub and dust cover from the steering knuckle.

(b) Remove the O-ring from the axle hub.

5. REMOVE FRONT WHEEL ADJUSTING NUT (for 2WD)





(a) Using SST and a hammer, unstake the adjusting nut.

SST : 09930-00010

(b) Using SST, remove the front wheel adjusting nut.





SST : 09318-12010

6. REMOVE FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY





(a) Gently fix the front axle hub in a vise.

(b) Using SST, remove the bearing.

SST : 09710-30021

09710-03051

SST : 09950-40011

09951-04020

09952-04010

09953-04020

09954-04010

09955-04061

09957-04010

09958-04011

7. REMOVE FRONT AXLE HUB OIL SEAL





(a) Using a screwdriver, remove the oil seal.

8. REMOVE PLUG (for 2WD)





(a) Using a screwdriver and hammer, remove the plug.