Installation

OTHER SYSTEM: VOLTAGE INVERTER: INSTALLATION

1. INSTALL VOLTAGE INVERTER ASSEMBLY

(a) Install the voltage inverter assembly with the 5 bolts.





Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)

(b) Connect the 2 connectors and install the wire harness clamp.





(c) Install the ground wire with the bolt.

Torque : 6.9 Nm (70 kgf-cm, 61 in-lbf)

2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH Installation

3. INSTALL REAR SEAT OUTER BELT ASSEMBLY RH Installation

4. INSTALL LAP BELT OUTER ANCHOR COVER Installation

5. INSTALL QUARTER TRIM POCKET (w/o Amplifier Box Speaker Assembly) Installation

6. INSTALL SIDE TRIM COVER (w/o Amplifier Box Speaker Assembly) Installation

7. INSTALL QUARTER TRIM POCKET TRAY (w/o Amplifier Box Speaker Assembly) Installation

8. INSTALL PACKAGE HOLDER NET HOOK (w/o Amplifier Box Speaker Assembly) Installation

9. INSTALL AMPLIFIER BOX SPEAKER ASSEMBLY (w/ Amplifier Box Speaker Assembly) Installation

10. INSTALL SPEAKER MOUNTING COVER (w/ Amplifier Box Speaker Assembly) Installation

11. INSTALL DECK SIDE GARNISH (w/ Amplifier Box Speaker Assembly) Installation

12. INSTALL REAR DOOR SCUFF PLATE RH Installation

13. INSTALL FRONT DOOR SCUFF PLATE RH Installation

14. INSTALL REAR FLOOR MAT ASSEMBLY Installation

15. INSTALL REAR FLOOR MAT SUPPORT PLATE Installation

16. INSTALL REAR FLOOR BOARD Installation

17. INSTALL REAR SEATBACK ASSEMBLY RH Installation

18. INSTALL REAR SEAT BACK BOARD CARPET ASSEMBLY RH Installation

19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 3.9 Nm (40 kgf-cm, 35 in-lbf)