Installation

PARKING BRAKE: PARKING BRAKE SWITCH: INSTALLATION

1. INSTALL PARKING BRAKE SWITCH





(a) Install the parking brake switch with the screw.

(b) Connect the parking brake switch connector.

2. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY Installation

3. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD) Installation

4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) Installation

5. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 3.9 Nm (40 kgf-cm, 35 in-lbf)