Air Bag Deactivation Switch: Testing and Inspection

SUPPLEMENTAL RESTRAINT SYSTEM: CURTAIN SHIELD AIRBAG CUTOFF SWITCH: INSPECTION

1. INSPECT CURTAIN AIRBAG CUTOFF SWITCH

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





If the result is not as specified, replace the switch.

(b) Check the illumination operation.

(1) Connect the positive (+) lead from the battery to terminal 2 (ILL+) and the negative (-) lead to terminal 1 (ILL-), and then check that the illumination lights up.

OK:

Bulb illuminates

If the result is not as specified, replace the switch.