Reassembly

RA61F MANUAL TRANSMISSION: OUTPUT SHAFT: REASSEMBLY

1. INSTALL OUTPUT SHAFT REAR BEARING





(a) Using SST and a press, install a new output shaft rear bearing onto the output shaft.

SST : 09316-60011

09316-00011

(b) Apply a light coat of MP grease to the bearing.

2. INSTALL OUTPUT SHAFT CENTER BEARING

(a) Apply gear grease to the output shaft center bearing and install it onto the output shaft.

3. INSTALL NO. 3 SYNCHRONIZER RING

(a) Apply gear oil to the No. 3 synchronizer ring, and install it onto the output shaft.