Operation CHARM: Car repair manuals for everyone.

Back Sonar Sensor Circuit





PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: Back Sonar Sensor Circuit
- Back Sonar Sensor Circuit

DESCRIPTION

This circuit shows the sensor power supply, sensor GND and sensor signal wires between the clearance warning ECU and No. 1 ultrasonic sensors. The No. 1 ultrasonic sensors are digital sensors.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (CLEARANCE WARNING ECU - NO. 1 ULTRASONIC SENSOR LH)

(a) Disconnect the E80 clearance warning ECU connector.

(b) Disconnect the d2 No. 1 ultrasonic sensor LH connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





(d) Reconnect the clearance warning ECU connector.

(e) Reconnect the No. 1 ultrasonic sensor connector.

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

2. REPLACE NO. 1 ULTRASONIC SENSOR LH

(a) Replace the No. 1 ultrasonic sensor LH with a normally functioning sensor Removal.

HINT
All the ultrasonic sensors are the same. Switch the right and left sensors to confirm if the sensors function normally.

NEXT -- Continue to next step.

3. CHECK INTUITIVE PARKING ASSIST SYSTEM

(a) Check the operation of the Intuitive parking assist system Operation Check.

Result





B -- END (NO. 1 ULTRASONIC SENSOR LH MALFUNCTION)
A -- Continue to next step.

4. CHECK HARNESS AND CONNECTOR (ULTRASONIC SENSOR LH - ULTRASONIC SENSOR RH)

(a) Disconnect the d2 No. 1 ultrasonic sensor LH connector.

(b) Disconnect the d1 No. 1 ultrasonic sensor RH connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





(d) Reconnect the No. 1 ultrasonic sensor connectors.

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

5. REPLACE NO. 1 ULTRASONIC SENSOR RH

(a) Replace the No. 1 ultrasonic sensor RH with a normally functioning sensor Removal.

HINT
All the ultrasonic sensors are the same. Switch the right and left sensors to confirm if the sensors function normally.

NEXT -- Continue to next step.

6. CHECK
INTUITIVE PARKING ASSIST SYSTEM

(a) Check the operation of the Intuitive parking assist system Operation Check.

Result





B -- END (NO. 1 ULTRASONIC SENSOR RH MALFUNCTION)

A -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Intuitive Parking Assist System