Rear View Monitor System (w/o Navigation System)

PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM: TERMINALS OF ECU

1. TELEVISION CAMERA ASSEMBLY

(a) Disconnect the c1 television camera assembly connector.





(b) Measure the voltage according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the c1 television camera assembly connector.

(d) Measure the waveform according to the value(s) in the table below.





If the result is not as specified, the camera may have a malfunction.

(e) Using an oscilloscope, check the waveform.





Waveform (Reference)





2. INNER REAR VIEW MIRROR ASSEMBLY

(a) Disconnect the R6 inner rear view mirror assembly connector.





(b) Measure the voltage and resistance according to the value(s) in the table below.





(c) Reconnect the R6 inner rear view mirror assembly connector.

(d) Measure the waveform according to the value(s) in the table below.





(e) Using an oscilloscope, check the waveform.





Waveform (Reference)