Disassembly

EXTERIOR: REAR BUMPER: DISASSEMBLY

1. REMOVE NO. 8 FLOOR WIRE (w/ Back Sonar)





(a) Disconnect the 2 connectors.

(b) Disengage the 7 clamps and remove the floor wire.

2. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Back Sonar)

(a) Disengage the 2 claws and remove the ultrasonic sensor.





HINT
Use the same procedure for the remaining parts.

3. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ Back Sonar)

(a) Disengage the 2 claws and remove the ultrasonic sensor retainer.





HINT
Use the same procedure for the remaining parts.

4. REMOVE REAR BUMPER PAD LH

(a) Remove the 5 retainers.





(b) Disengage the 5 claws and remove the rear bumper pad.

5. REMOVE REAR BUMPER PAD RH

HINT
Use the same procedure as for the LH side.

6. REMOVE REFLEX REFLECTOR ASSEMBLY LH

(a) Remove the nut and the reflex reflector.





7. REMOVE REFLEX REFLECTOR ASSEMBLY RH

HINT
Use the same procedure as for the LH side.

8. REMOVE REAR BUMPER LOWER COVER

(a) Remove the 4 screws.





(b) Disengage the 4 clips and remove the rear bumper lower cover.

(c) Remove the 4 screw grommets.