Component Tests and General Diagnostics

DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: ON-VEHICLE INSPECTION

1. CHECK ELECTRICAL DOOR LOCK OPERATION

(a) Check that all doors lock when the door control switch (for manual operation) is turned to LOCK and all doors unlock when turned to UNLOCK.

(b) Check that all doors lock when the door lock key cylinder is turned to LOCK using the mechanical key and unlock when turned to UNLOCK using the mechanical key.

(c) Check that only the driver side door unlocks when the driver side door lock key cylinder is turned to UNLOCK and all doors unlock when turned to UNLOCK once again within 3 seconds using the key (2-step unlocking function).

(d) Check the key lock-in prevention function.

NOTICE:
Perform this operation with the driver door window open to prevent the key from being locked inside the vehicle.

(1) Insert the ignition key into the ignition key cylinder.

(2) Check that all doors are immediately unlocked when the driver side door lock knob is turned to the lock position with the driver door open.

(3) Check that all doors are immediately unlocked when the door control switch (for driver side) or door control switch (for front passenger side) is turned to the lock position with the driver door open.

(4) Check that all doors are unlocked when the driver door is closed after the driver door lock knob is held in the lock position for 2 seconds with the driver door open.