Removal

1GR-FE ENGINE CONTROL SYSTEM: HEATED OXYGEN SENSOR: REMOVAL

CAUTION:
* Wear protective gloves when removing the sensor.
* The exhaust pipe assembly is extremely hot immediately after the engine has stopped.
* Confirm that the exhaust pipe assembly has cooled down before removing it.
1. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

(a) Disconnect the sensor connector.

(b) Using SST, remove the sensor.





SST : 09224-00010

2. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)

(a) Disconnect the sensor connector.

(b) Using SST, remove the sensor.





SST : 09224-00010