Installation

1GR-FE ENGINE CONTROL SYSTEM: VVT SENSOR: INSTALLATION

1. INSTALL VVT SENSOR (for Exhaust Side of Bank 2)

(a) Apply a light coat of engine oil to the O-ring of the sensor.





Text in Illustration





NOTICE:
* When reusing the sensor, inspect the O-ring.
* If the O-ring has scratches or cuts, replace the sensor.

(b) Install the sensor with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(c) Connect the sensor connector.

2. INSTALL VVT SENSOR (for Intake Side of Bank 2)

(a) Apply a light coat of engine oil to the O-ring of the sensor.

NOTICE:
* When reusing the sensor, inspect the O-ring.
* If the O-ring has scratches or cuts, replace the sensor.

(b) Install the sensor with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(c) Connect the sensor connector.

3. INSTALL VVT SENSOR (for Exhaust Side of Bank 1)

(a) Apply a light coat of engine oil to the O-ring of the sensor.

NOTICE:
* When reusing the sensor, inspect the O-ring.
* If the O-ring has scratches or cuts, replace the sensor.

(b) Install the sensor with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(c) Connect the sensor connector.

4. INSTALL VVT SENSOR (for Intake Side of Bank 1)

(a) Apply a light coat of engine oil to the O-ring of the sensor.

NOTICE:
* When reusing the sensor, inspect the O-ring.
* If the O-ring has scratches or cuts, replace the sensor.

(b) Install the sensor with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(c) Connect the sensor connector.

5. INSTALL AIR CLEANER HOSE ASSEMBLY Installation

6. INSTALL V-BANK COVER Installation