How to Proceed With Troubleshooting

A750F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISSION SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HINT
* The ECM of this system is connected to the CAN communication system. Therefore, before starting troubleshooting, make sure that there is no trouble in the CAN communication system.
* *: Use a Techstream.

1. VEHICLE BROUGHT TO WORKSHOP

NEXT -- Continue to next step.

2. CUSTOMER PROBLEM ANALYSIS

Refer to the Customer Problem Analysis How To Proceed With Troubleshooting.

NEXT -- Continue to next step.

3. CONNECT TECHSTREAM TO DLC3 *

NEXT -- Continue to next step.

4. CHECK AND CLEAR DTCS AND FREEZE FRAME DATA *

Refer to the DTC Check / Clear Reading and Clearing Diagnostic Trouble Codes.

NEXT -- Continue to next step.

5. VISUAL INSPECTION

NEXT -- Continue to next step.

6. SETTING CHECK MODE DIAGNOSIS *

Refer to the Check Mode Procedure Check Mode Procedure.

NEXT -- Continue to next step.

7. PROBLEM SYMPTOM CONFIRMATION

Refer to the Road Test Road Test.

Result





B -- GO TO STEP 9
A -- Continue to next step.

8. SYMPTOM SIMULATION

Refer to the Electronic Circuit Inspection Procedure Electronic Circuit Inspection Procedure.

NEXT -- Continue to next step.

9. DTC CHECK *

Refer to the DTC Check / Clear Reading and Clearing Diagnostic Trouble Codes.

Result





B -- GO TO STEP 17
A -- Continue to next step.

10. BASIC INSPECTION

Refer to the Automatic Transmission Fluid Procedures.

Refer to the Park/Neutral Position Switch Adjustments.

Refer to the Floor Shift Assembly Adjustments.

NG -- GO TO STEP 19
OK -- Continue to next step.

11. MECHANICAL SYSTEM TEST

Refer to the Mechanical System Test Mechanical System Tests.

NG -- GO TO STEP 16
OK -- Continue to next step.

12. HYDRAULIC TEST

Refer to the Hydraulic Test Hydraulic Test.

NG -- GO TO STEP 16
OK -- Continue to next step.

13. MANUAL SHIFTING TEST

Refer to the Manual Shifting Test Manual Shifting Test.

NG -- GO TO STEP 15
OK -- Continue to next step.

14. PROBLEM SYMPTOMS TABLE CHAPTER 1

Refer to the Problem Symptoms Table Symptom Related Diagnostic Procedures.

NG -- GO TO STEP 18
OK -- Continue to next step.

15. PROBLEM SYMPTOMS TABLE CHAPTER 2

Refer to the Problem Symptoms Table Symptom Related Diagnostic Procedures.

NEXT -- Continue to next step.

16. PART INSPECTION

NEXT -- GO TO STEP 19

17. DTC CHART*

Refer to the Diagnostic Trouble Code Chart Automatic Transmission System - A750F.

NEXT -- Continue to next step.

18. CIRCUIT INSPECTION*

NEXT -- Continue to next step.

19. REPAIR OR REPLACE

NEXT -- Continue to next step.

20. CONFIRMATION TEST*

NEXT -- END