Installation

1GR-FE ENGINE CONTROL SYSTEM: ECM: INSTALLATION

1. INSTALL NO. 2 ECM BRACKET

(a) Install the No. 2 ECM bracket with the 2 screws.

Torque : 3.0 Nm (31 kgf-cm, 27 in-lbf)

2. INSTALL ECM BRACKET

(a) Install the ECM bracket with the 2 screws.

Torque : 3.0 Nm (31 kgf-cm, 27 in-lbf)

3. INSTALL ECM

(a) Install the ECM with the 3 nuts.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(b) Connect the 6 connectors.

4. INSTALL 4 WHEEL DRIVE CONTROL ECU NO.2 (for Automatic Transmission 4WD)

(a) Install the four wheel drive control ECU with the bolt.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Connect the connector.

5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

6. PERFORM INITIALIZATION Installation