Removal

SUPPLEMENTAL RESTRAINT SYSTEM: SIDE AIRBAG SENSOR: REMOVAL

HINT
* Use the same procedures for the RH side and LH side.
* The procedures described below are for the LH side.

1. PRECAUTION

CAUTION:
Read "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.

3. REMOVE FRONT DOOR SCUFF PLATE LH Removal

4. REMOVE ACCESS DOOR SCUFF PLATE LH Removal

5. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

(a) Remove the front door opening trim weatherstrip LH to the extent necessary to remove the side airbag sensor LH Removal.

6. REMOVE SIDE AIRBAG SENSOR LH

(a) Disconnect the connector from the side airbag sensor LH.





(b) Remove the bolt and the side airbag sensor LH.