Installation

SUSPENSION: FRONT STABILIZER BAR: INSTALLATION

1. INSTALL FRONT STABILIZER BAR NO. 1 BUSH





(a) Install the 2 stabilizer bar bushes onto the stabilizer bar.

HINT
* Install the bush onto the outer side of the bush stopper on the stabilizer bar.
* Install the bush so that the protrusion faces inner side of the vehicle.

2. INSTALL FRONT STABILIZER BAR





(a) Install the stabilizer bar and 2 stabilizer brackets with the 4 bolts.

Torque : 49 Nm (500 kgf-cm, 36 ft-lbf)

3. INSTALL FRONT STABILIZER LINK ASSEMBLY LH





(a) Install the stabilizer link with the 2 nuts.

Torque : 70 Nm (714 kgf-cm, 52 ft-lbf)

HINT
If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.

4. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

HINT
The installation procedure for the RH side is the same as that for the LH side.

5. INSTALL ENGINE UNDER COVER SUB-ASSEMBLY

Torque : 29 Nm (296 kgf-cm, 21 ft-lbf)

6. INSTALL FRONT WHEELS

Torque : 112 Nm (1,137 kgf-cm, 82 ft-lbf)