Reassembly

INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD: REASSEMBLY

1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY Installation

2. INSTALL COOLER SWITCH HOLE COVER (w/o Automatic Light Control System)

(a) Engage the 2 claws and install the cooler switch hole cover.





3. INSTALL AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System) Installation

4. INSTALL NO. 4 INSTRUMENT PANEL WIRE

(a) Engage the 5 clamps.





(b) Connect the connector and install the No. 4 instrument panel wire.

5. INSTALL ANTENNA CORD SUB-ASSEMBLY (for Pole Antenna Type) Installation

6. INSTALL ANTENNA CORD SUB-ASSEMBLY (for Glass Antenna Type) Installation

7. INSTALL NAVIGATION ANTENNA ASSEMBLY Installation

8. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

(a) Install the No. 2 instrument panel register assembly with the 3 screws [I].





9. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

(a) Install the No. 1 instrument panel register assembly with the 3 screws [I].





10. INSTALL CENTER HEATER TO REGISTER SUB DUCT

(a) Install the center heater to register sub duct with the 2 screws [I].





11. INSTALL DEFROSTER NOZZLE ASSEMBLY

(a) Install the defroster nozzle assembly with the 3 screws [F] and clip.





12. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT

(a) Install the side No. 2 defroster nozzle duct with the screw [I].





13. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT

(a) Install the side No. 1 defroster nozzle duct with the screw [I].





14. INSTALL NO. 4 HEATER TO REGISTER DUCT

(a) Install the No. 4 heater to register duct with the 3 screws [I].





15. INSTALL NO. 1 HEATER TO REGISTER DUCT

(a) Install the No. 1 heater to register duct with the 3 screws [I].