Disassembly

SEAT: REAR NO. 2 SEAT ASSEMBLY: DISASSEMBLY

1. REMOVE REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY RH

(a) Remove the rear No. 2 seat inner belt sub-assembly RH Removal.

HINT
Use the same procedure for the RH side and LH side.

2. REMOVE REAR NO. 2 SEAT CUSHION HINGE COVER

(a) Remove the 2 screws.

(b) Disengage the 2 clips and remove the rear No. 2 seat cushion hinge cover.

3. REMOVE RECLINING COVER PROTECTOR LH

(a) Remove the 2 screws and reclining cover protector LH.

4. REMOVE NO. 2 SEAT OUTER HINGE COVER LH

(a) Remove the 2 screws and No. 2 seat outer hinge cover LH.

5. REMOVE REAR NO. 2 SEAT CUSHION COVER WITH PAD LH

(a) Using a "T45" TORX socket wrench, remove the 2 bolts and 2 bushes.

(b) Remove the 2 bolts and rear No. 2 seat cushion cover with pad LH.

6. REMOVE REAR NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY LH

(a) Remove the 2 hog rings.

(b) Disengage each hook.

(d) Remove the 7 hog rings and rear No. 2 seat cushion cover sub-assembly LH.

7. REMOVE NO. 2 SEATBACK BOARD SUB-ASSEMBLY LH

(a) Disengage the 6 claws and remove the No. 2 seatback board sub-assembly LH.

8. REMOVE REAR NO. 2 SEATBACK COVER WITH PAD LH

(a) Disengage the 13 hooks.

Text in Illustration

(b) Disengage the fastener.

(c) Disengage the hook.

(d) Remove the 2 screws.

(e) Disengage the hook as shown in the illustration and remove the rear side seat band sub-assembly LH with rear No. 1 seat cover bezel LH.

(f) Remove the rear No. 1 seat cover bezel LH.

(g) Disengage the 8 clips and remove the rear No. 2 seatback cover with pad LH.

9. REMOVE REAR NO. 2 SEATBACK COVER SUB-ASSEMBLY LH

(a) Remove the 9 hog rings and the rear No. 2 seatback cover sub-assembly LH.

10. REMOVE REAR SEAT HEADREST COVER LH

(a) Remove the 2 screws and rear seat headrest cover LH.

11. REMOVE REAR NO. 2 SEAT HEADREST ASSEMBLY LH

(a) Disconnect the 2 cable clamps.

(b) Remove the 3 nuts and rear No. 2 seat headrest assembly LH.

12. REMOVE REAR SEATBACK EDGE PROTECTOR LH

(a) Disengage the 4 claws and remove the 2 rear seatback edge protectors LH.

13. REMOVE REAR NO. 1 SEAT LOWER CUSHION HINGE COVER LH

(a) Disengage the 2 claws and remove the rear No. 1 seat lower cushion hinge cover LH.

14. REMOVE REAR NO. 1 SEAT LOWER CUSHION HINGE COVER RH

(a) Disengage the 2 claws and remove the rear No. 1 seat lower cushion hinge cover RH.

15. REMOVE REAR NO. 2 SEAT OUTER RECLINING COVER LH

(a) Remove the screw.

(b) Disengage the claw and guide, and remove the rear No. 2 seat outer reclining cover LH.

16. REMOVE REAR NO. 2 SEAT INNER RECLINING COVER LH

(a) Remove the screw.

(b) Disengage the 2 claws and remove the rear No. 2 seat inner reclining cover LH.

17. REMOVE NO. 2 SEAT INNER HINGE COVER LH

(a) Disengage the claw and remove the No. 2 seat inner hinge cover LH.

18. REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY LH

(a) Disengage the 2 cable clamps and remove the rear No. 1 seat lock cable assembly LH.

19. REMOVE REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY LH

(a) Disengage the 4 cable clamps and remove the rear No. 2 seat cushion lock cable assembly LH.

20. REMOVE REAR NO. 2 SIDE SEAT BAND SUB-ASSEMBLY LH

(a) Using a drill bit with a diameter of less than 4 mm (0.158 in.), drill out the rivet head and remove the rear No. 2 side seat band sub-assembly LH.

21. REMOVE REAR SEAT OUTER SUSPENSION LINK SUB-ASSEMBLY LH

(a) Remove the 2 nuts and the rear seat outer suspension link sub-assembly LH.

(b) Remove the E-ring.

(c) Disengage the hook and remove the spring.

22. REMOVE REAR SEAT INNER SUSPENSION LINK SUB-ASSEMBLY LH

(a) Remove the 2 nuts and rear seat inner suspension link sub-assembly LH.

23. REMOVE NO. 2 SEATBACK FRAME SUB-ASSEMBLY LH

(a) Remove the 2 bolts [A].

(b) Remove the bolt [B].

(c) Remove the 2 nuts [C] and No. 2 seatback frame sub-assembly LH.

24. REMOVE RECLINING COVER PROTECTOR RH

(a) Remove the 2 screws and reclining cover protector RH.

25. REMOVE NO. 2 SEAT OUTER HINGE COVER RH

(a) Remove the 2 screws and No. 2 seat outer hinge cover RH.

26. REMOVE REAR SEAT CUSHION COVER WITH PAD RH

(a) Using a "T45" TORX socket wrench, remove the 2 bolts and 2 bushes.

(b) Remove the 2 bolts and rear No. 2 seat cushion cover with pad RH.

27. REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY RH

(a) Remove the 2 hog rings.

(b) Disengage each hook.

(d) Remove the 7 hog rings and rear No. 2 seat cushion cover sub-assembly RH.

28. REMOVE NO. 2 SEATBACK BOARD SUB-ASSEMBLY RH

(a) Disengage the 6 claws and remove the No. 2 seatback board sub-assembly RH.

29. REMOVE NO. 2 SEATBACK COVER WITH PAD RH

(a) Disengage the 13 hooks.

Text in Illustration

(b) Disengage the fastener.

(c) Disengage the hook.

(d) Remove the 2 screws.

(e) Disengage the hook as shown in the illustration and remove the rear side seat band sub-assembly RH with rear No. 1 seat cover bezel RH.

(f) Remove the rear No. 1 seat cover bezel RH.

(g) Disengage the 8 clips and remove the rear No. 2 seatback cover with pad RH.

30. REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY RH

(a) Remove the 9 hog rings and rear No. 2 seatback cover sub-assembly RH.

31. REMOVE REAR SEAT HEADREST COVER RH

(a) Remove the 2 screws and rear No. 2 seat headrest cover RH.

32. REMOVE NO. 2 SEAT HEADREST ASSEMBLY RH

(a) Disconnect the 2 cable clamps.

(b) Remove the 3 nuts and rear No. 2 seat headrest assembly RH.

33. REMOVE REAR SEAT BACK EDGE PROTECTOR RH

(a) Disengage the 4 claws and remove the 2 rear seatback edge protectors RH.

34. REMOVE REAR NO. 2 SEAT LOWER CUSHION HINGE COVER LH

(a) Disengage the 2 claws and remove the rear No. 2 seat lower cushion hinge cover LH.

35. REMOVE REAR NO. 2 SEAT LOWER CUSHION HINGE COVER RH

(a) Disengage the 2 claws and remove the rear No. 2 seat lower cushion hinge cover RH.

36. REMOVE NO. 2 SEAT HINGE COVER RH

(a) Remove the screw.

(b) Disengage the claw and guide, and remove the No. 2 seat hinge cover RH.

37. REMOVE REAR NO. 2 SEAT RECLINING COVER RH

(a) Remove the screw.

(b) Disengage the 2 claws and remove the rear No. 2 seat reclining cover RH.

38. REMOVE NO. 2 SEAT INNER HINGE COVER RH

(a) Disengage the claw and remove the No. 2 seat inner hinge cover RH.

39. REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY RH

(a) Disengage the 2 cable clamps and remove the rear No. 1 seat lock cable assembly RH.

40. REMOVE REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY RH

(a) Disengage the 4 cable clamps and remove the rear No. 2 seat lock cable assembly RH.

41. REMOVE REAR NO. 2 SIDE SEAT BAND SUB-ASSEMBLY RH

(a) Using a drill bit with a diameter of less than 4 mm (0.158 in.), drill out the rivet head and remove the rear No. 2 side seat band sub-assembly RH.

42. REMOVE REAR SEAT OUTER SUSPENSION LINK SUB-ASSEMBLY RH

(a) Remove the 2 nuts and rear seat outer suspension link sub-assembly RH.

(b) Remove the E-ring.

(c) Disengage the hook and remove the spring.

43. REMOVE REAR SEAT INNER SUSPENSION LINK SUB-ASSEMBLY RH

(a) Remove the 2 nuts and rear seat inner suspension link sub-assembly RH.

44. REMOVE NO. 2 SEATBACK FRAME SUB-ASSEMBLY RH

(a) Remove the 2 bolts.

(b) Remove the 2 nuts and No. 2 seatback frame sub-assembly RH.