Installation

LIGHTING: TURN SIGNAL FLASHER ASSEMBLY: INSTALLATION

1. INSTALL TURN SIGNAL FLASHER ASSEMBLY

(a) Connect the connector.

(b) Engage the claw and install the turn signal flasher assembly.





2. INSTALL POWER STEERING ECU ASSEMBLY Installation

3. CONNECT INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

(a) Connect the instrument panel junction block assembly with the 3 nuts.





Torque : 8.4 Nm (86 kgf-cm, 74 in-lbf)

4. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY

Installation