Installation

2GR-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

(a) Install a new gasket onto the engine coolant temperature sensor.

(b) Install the engine coolant temperature sensor.





Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

(c) Connect the engine coolant temperature sensor connector.

2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY Installation

3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Installation

4. INSTALL NO. 1 AIR CLEANER INLET Installation

5. INSTALL NO. 2 AIR CLEANER INLET Installation

6. INSTALL BATTERY Installation

7. INSTALL COOL AIR INTAKE DUCT SEAL Installation

8. ADD ENGINE COOLANT Service and Repair

9. INSPECT FOR COOLANT LEAK Testing and Inspection

10. INSTALL NO. 1 ENGINE UNDER COVER Installation

11. INSTALL ENGINE UNDER COVER ASSEMBLY Installation

12. INSTALL V-BANK COVER SUB-ASSEMBLY Installation