Engine Switch

2GR-FE STARTING: ENGINE SWITCH: INSPECTION

1. INSPECT ENGINE SWITCH





(a) Measure the resistance according to the value(s) in the table below.

Standard resistance:





If the result is not as specified, replace the engine switch.

(b) Apply battery voltage between the terminals of the switch, and check the illumination condition of the switch.

HINT
* If the positive (+) lead and the negative (-) lead are incorrectly connected, the engine switch indicator light will not illuminate.
* If the voltage is too low, the indicator light will not illuminate.

OK:









If the result is not as specified, replace the engine switch.