Installation

SUSPENSION: REAR STABILIZER BAR (for 2WD): INSTALLATION

1. INSTALL REAR STABILIZER BUSHING (for LH Side)

(a) Install the rear stabilizer bushing.





2. INSTALL REAR STABILIZER BUSHING (for RH Side)

HINT
Perform the same procedure as the LH side.

3. INSTALL REAR NO. 1 STABILIZER BAR BRACKET (for LH Side)

(a) Install the rear stabilizer bar bracket.





4. INSTALL REAR NO. 1 STABILIZER BAR BRACKET (for RH Side)

HINT
Perform the same procedure as the LH side.

5. INSTALL REAR STABILIZER BAR

(a) Install the rear stabilizer bar with the 4 bolts.





Torque : 19 Nm (194 kgf-cm, 14 ft-lbf)

6. INSTALL REAR STABILIZER LINK ASSEMBLY LH

(a) Install the rear stabilizer link assembly LH to the rear shock absorber with coil spring LH with the nut.





Torque : 39 Nm (400 kgf-cm, 29 ft-lbf)

HINT
If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud bolt.

(b) Install the rear stabilizer link assembly LH to the rear stabilizer bar with the nut.





Torque : 39 Nm (400 kgf-cm, 29 ft-lbf)

HINT
If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud bolt.

7. INSTALL REAR STABILIZER LINK ASSEMBLY RH

HINT
Perform the same procedure as the LH side.

8. INSTALL REAR WHEELS

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)