Vehicle Position Mark Is Not Updated

NAVIGATION: NAVIGATION SYSTEM: Vehicle Position Mark is not Updated
- Vehicle Position Mark is not Updated

INSPECTION PROCEDURE

PROCEDURE

1. CHECK MAP DISC

(a) Check that the map disc is not deformed or cracked.





OK:

No deformations or cracks on the map disc

NG -- REPLACE MAP DISC
OK -- Continue to next step.

2. CHECK NAVIGATION DISPLAY

(a) Check if touch scrolling can be performed on the map display.

OK:

Touch scrolling can be performed.

NG -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Symptom Related Diagnostic Procedures
OK -- Continue to next step.

3. CHECK VEHICLE SENSOR (OPERATION CHECK)

(a) Enter the "Vehicle Sensors" screen. Refer to Check GPS & Vehicle Sensors in Operation Check (Check GPS & Vehicle Sensors) Operation Check.





(b) While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check if these readings are almost equal.

OK:

The readings are almost equal.

NG -- CHECK DTC OUTPUT Reading and Clearing Diagnostic Trouble Codes

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Symptom Related Diagnostic Procedures