Removal

2GR-FE ENGINE CONTROL SYSTEM: ACTIVE CONTROL ENGINE MOUNT: REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

2. REMOVE ENGINE UNDER COVER ASSEMBLY Removal

3. REMOVE NO. 1 ENGINE UNDER COVER Removal

4. DRAIN ENGINE COOLANT Service and Repair

5. REMOVE COOL AIR INTAKE DUCT SEAL Removal

6. REMOVE BATTERY Removal

7. REMOVE NO. 2 AIR CLEANER INLET Removal

8. REMOVE NO. 1 AIR CLEANER INLET Removal

9. DISCONNECT NO. 1 RADIATOR HOSE Removal

10. DISCONNECT NO. 2 RADIATOR HOSE Removal

11. DISCONNECT OIL COOLER HOSE Removal

12. DISCONNECT COOLING FAN ECU CONNECTOR Removal

13. REMOVE RADIATOR GRILLE SUB-ASSEMBLY Removal

14. REMOVE HOOD LOCK ASSEMBLY (w/o Engine Hood Courtesy Switch) Removal

15. REMOVE HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch) Removal

16. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY Removal

17. SEPARATE COOLER CONDENSER ASSEMBLY Removal

18. REMOVE RADIATOR ASSEMBLY AND FAN ASSEMBLY WITH MOTOR Removal

19. REMOVE TRANSVERSE ENGINE MOUNTING BRACKET

HINT
Securely support the automatic transaxle using a jack.

(a) Remove the nut, 3 bolts and the transverse engine mounting bracket.

20. REMOVE FRONT ENGINE MOUNTING INSULATOR ASSEMBLY

(a) Disconnect the vacuum hose sub-assembly from the air cleaner cap sub-assembly and vacuum switching valve.

(b) Remove the 2 clamps.

(d) Remove the cap, 3 nuts and front engine mounting insulator assembly.