Axle Nut: Specifications
FRONT AXLE HUB NUT LHClean the threaded parts on the drive shaft and a new axle hub nut using a non-residue solvent.
Be sure to perform this work for a new drive shaft.
Keep the threaded parts free of oil and foreign objects.
Using a socket wrench (30 mm), install the new axle hub nut.
Torque 294 Nm (2996 kgf-cm, 216 ft-lbf)
REAR AXLE SHAFT NUT LH (for 4WD)
Clean the threaded parts on the drive shaft and axle hub nut using a non-residue solvent.
Be sure to perform this work for a new drive shaft.
Keep the threaded parts free of oil and foreign objects.
Install a new rear axle shaft nut.
Torque 294 Nm (2996 kgf-cm, 216 ft-lbf)
REAR AXLE SHAFT NUT (for 4WD)
Clean the threaded parts on the rear drive shaft assembly and rear axle shaft nut using a non-residue solvent.
Be sure to perform this work for a new rear drive shaft assembly.
Keep the threaded parts free of oil and foreign objects.
While applying the brakes, temporarily install a new rear axle shaft nut.
Torque 294 Nm (2996 kgf-cm, 216 ft-lbf)
Stake the nut after inspecting for looseness and runout in the following steps.