Replacement

2GR-FE CHARGING: GENERATOR: REPLACEMENT

1. REPLACE GENERATOR DRIVE END FRAME BEARING

(a) Remove the 4 screws and bearing retainer from the drive end frame.





(b) Using SST and a hammer, tap out the drive end frame bearing from the drive end frame.





SST : 09950-60010

09951-00250

SST : 09950-70010

09951-07100

(c) Using SST and a press, press in a new generator drive end frame bearing.





SST : 09950-60010

09951-00470

SST : 09950-70010

09951-07100

(d) Fit the tabs on the bearing retainer into the cutouts on the drive end frame to install the bearing retainer.





(e) Install the 4 screws.

Torque : 2.3 Nm (23 kgf-cm, 20 in-lbf)