Pinout Values and Diagnostic Parameters

U151F AUTOMATIC TRANSAXLE: AUTOMATIC TRANSAXLE SYSTEM: TERMINALS OF ECM

1. ECM





HINT
Each ECM terminal's standard voltage is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbols)" for the terminals to inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.









(a) Waveform 1





Reference:





(b) Waveform 2





Reference:





(c) Waveform 3





Reference:





(d) Waveform 4





Reference:





(e) Waveform 5





Reference:





(f) Waveform 6





Reference:





(g) Waveform 7





Reference:





(h) Waveform 8





Reference: