Installation

SEAT: SEAT HEATER CONTROL (for Manual Seat): INSTALLATION

1. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY





(a) Engage the 2 clamps and install the seat heater control sub-assembly.

(b) Connect the connectors.

2. INSTALL FRONT SEAT ASSEMBLY Installation

3. INSPECT FRONT SEAT SLIDE ADJUSTER LOCK Installation

4. INSTALL REAR SEAT TRACK COVER Installation

5. INSTALL FRONT INNER SEAT TRACK COVER Installation

6. INSTALL FRONT OUTER SEAT TRACK COVER Installation

7. INSTALL FRONT SEAT HEADREST ASSEMBLY Installation

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When reconnected the cable, some systems need to be initialized Repair Instruction - Initialization.

9. INSTALL BATTERY SERVICE HOLE COVER ASSEMBLY Installation

10. INSTALL DECK BOARD ASSEMBLY Installation

11. INSPECT FRONT SEAT ASSEMBLY

(a) Check the seat heater operation.

(1) Turn the ignition switch on (IG).

(2) Turn the seat heater switch on.

(3) Wait 5 minutes or more and confirm that the seat surface becomes warm.

12. INSPECT SRS WARNING LIGHT

Diagnosis System