Removal

SEAT: SEAT HEATER CONTROL (for Manual Seat): REMOVAL

1. REMOVE DECK BOARD ASSEMBLY Removal

2. REMOVE BATTERY SERVICE HOLE COVER ASSEMBLY Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Service Precautions.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE FRONT SEAT HEADREST ASSEMBLY Removal

5. REMOVE FRONT OUTER SEAT TRACK COVER Removal

6. REMOVE FRONT INNER SEAT TRACK COVER Removal

7. REMOVE REAR SEAT TRACK COVER Removal

8. REMOVE FRONT SEAT ASSEMBLY Removal

9. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY





(a) Disconnect the connector.

(b) Disengage the 2 clamps and remove the seat heater control sub-assembly.