Installation

LIGHTING: HEADLIGHT ASSEMBLY: INSTALLATION

1. INSTALL HEADLIGHT ASSEMBLY

(a) Connect the connectors and engage the clamp.

(b) Engage the claw and install the headlight assembly with the bolt and 2 screws.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(c) Engage the guide as shown in the illustration.





2. INSTALL FRONT BUMPER COVER Installation

3. INSTALL RADIATOR GRILLE Installation

4. INSTALL COOL AIR INTAKE DUCT SEAL Installation

5. VEHICLE PREPARATION FOR HEADLIGHT AIMING ADJUSTMENT Adjustments

6. PREPARATION FOR HEADLIGHT AIMING (Using a headlight aim test machine) Adjustments

7. PREPARATION FOR HEADLIGHT AIMING (Using a Screen) Adjustments

8. INSPECT HEADLIGHT AIMING Adjustments

9. ADJUST HEADLIGHT AIMING Adjustments

10. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT Adjustments

11. PREPARATION FOR FOG LIGHT AIMING Adjustments

12. INSPECT FOG LIGHT AIMING Adjustments

13. ADJUST FOG LIGHT AIMING Adjustments