Removal

HORN: SPIRAL CABLE: REMOVAL

1. PRECAUTION

CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing Service Precautions.

2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

3. REMOVE DECK BOARD ASSEMBLY Removal

4. REMOVE BATTERY SERVICE HOLE COVER ASSEMBLY Removal

5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Diagnosis System.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal

7. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal

8. REMOVE STEERING PAD Removal

9. REMOVE STEERING WHEEL ASSEMBLY Removal

10. REMOVE STEERING COLUMN COVER Removal

11. REMOVE SPIRAL CABLE WITH STEERING ANGLE SENSOR Removal

12. REMOVE SPIRAL CABLE

(a) Disengage the 6 claws and 2 pins, and remove the spiral cable from the steering angle sensor.