Part 2

CAN COMMUNICATION: CAN COMMUNICATION SYSTEM (w/o Smart Key System): Short in CAN Bus Lines
- Short in CAN Bus Lines - Continued

23. CONNECT CONNECTOR

(a) Reconnect the D59 No. 1 junction connector.

NEXT -- Continue to next step.

24. CHECK FOR SHORT IN CAN BUS WIRE (NO. 2 JUNCTION CONNECTOR - NO. 1 JUNCTION CONNECTOR)

(a) Disconnect the D55 No. 2 junction connector.





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





NG -- REPAIR OR REPLACE CAN MAIN WIRE OR CONNECTOR (NO. 2 JUNCTION CONNECTOR - NO. 1 JUNCTION CONNECTOR)
OK -- Continue to next step.

25. CHECK FOR SHORT IN CAN BUS WIRE (NO. 2 JUNCTION CONNECTOR - YAW RATE SENSOR ASSEMBLY)

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





Text in Illustration





NG -- CONNECT CONNECTOR
OK -- Continue to next step.

26. CHECK FOR SHORT IN CAN BUS WIRE (NO. 2 JUNCTION CONNECTOR - CENTER AIRBAG SENSOR ASSEMBLY)

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





Text in Illustration





NG -- CONNECT CONNECTOR
OK -- Continue to next step.

27. CHECK FOR SHORT IN CAN BUS WIRE (NO. 2 JUNCTION CONNECTOR - STEERING ANGLE SENSOR)

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





Text in Illustration





NG -- CONNECT CONNECTOR
OK -- Continue to next step.

28. CHECK FOR SHORT IN CAN BUS WIRE (NO. 2 JUNCTION CONNECTOR - POWER STEERING ECU ASSEMBLY)

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





Text in Illustration





NG -- CONNECT CONNECTOR
OK -- Continue to next step.

29. CHECK FOR SHORT IN CAN BUS WIRE (NO. 2 JUNCTION CONNECTOR - MAIN BODY ECU)

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





Text in Illustration





NG -- CONNECT CONNECTOR
OK -- Continue to next step.

30. CHECK FOR SHORT IN CAN BUS WIRE (NO. 2 JUNCTION CONNECTOR - COMBINATION METER ASSEMBLY)

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





Text in Illustration





NG -- CONNECT CONNECTOR

OK -- REPLACE NO. 2 JUNCTION CONNECTOR

31. CONNECT CONNECTOR

(a) Reconnect the D55 No. 2 junction connector.

NEXT -- Continue to next step.

32. CHECK FOR SHORT IN CAN BUS WIRE (YAW RATE SENSOR ASSEMBLY)

(a) Disconnect the O6 yaw rate sensor assembly connector.





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





NG -- REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO YAW RATE SENSOR ASSEMBLY (CANH, CANL)

OK -- REPLACE YAW RATE SENSOR ASSEMBLY Removal

33. CONNECT CONNECTOR

(a) Reconnect the D55 No. 2 junction connector.

NEXT -- Continue to next step.

34. CHECK FOR SHORT IN CAN BUS WIRE (CENTER AIRBAG SENSOR ASSEMBLY)

(a) Disconnect the D30 center airbag sensor assembly connector.





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





NG -- REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO CENTER AIRBAG SENSOR ASSEMBLY (CANH, CANL)

OK -- REPLACE CENTER AIRBAG SENSOR ASSEMBLY Removal

35. CONNECT CONNECTOR

(a) Reconnect the D55 No. 2 junction connector.

NEXT -- Continue to next step.

36. CHECK FOR SHORT IN CAN BUS WIRE (STEERING ANGLE SENSOR)

(a) Disconnect the D14 steering angle sensor connector.





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





NG -- REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO STEERING ANGLE SENSOR (CANH, CANL)

OK -- REPLACE STEERING ANGLE SENSOR Removal

37. CONNECT CONNECTOR

(a) Reconnect the D55 No. 2 junction connector.

NEXT -- Continue to next step.

38. CHECK FOR SHORT IN CAN BUS WIRE (POWER STEERING ECU ASSEMBLY)

(a) Disconnect the D6 power steering ECU assembly connector.





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





NG -- REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO POWER STEERING ECU ASSEMBLY (CANH, CANL)

OK -- REPLACE POWER STEERING ECU ASSEMBLY Removal

39. CONNECT CONNECTOR

(a) Reconnect the D55 No. 2 junction connector.

NEXT -- Continue to next step.

40. CHECK FOR SHORT IN CAN BUS WIRE (MAIN BODY ECU)

(a) Disconnect the D9 main body ECU (instrument panel junction block assembly) connector.





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





NG -- REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO MAIN BODY ECU (CANH, CANL)

OK -- REPLACE MAIN BODY ECU (INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY)

41. CONNECT CONNECTOR

(a) Reconnect the D55 No. 2 junction connector.

NEXT -- Continue to next step.

42. CHECK FOR SHORT IN CAN BUS WIRE (COMBINATION METER ASSEMBLY)

(a) Disconnect the E1 combination meter assembly connector.





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





NG -- REPAIR OR REPLACE CAN MAIN WIRE CONNECTED TO COMBINATION METER ASSEMBLY (CANH, CANL)

OK -- REPLACE COMBINATION METER ASSEMBLY Removal