Installation

2GR-FXE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: INSTALLATION

1. INSTALL CRANKSHAFT POSITION SENSOR

(a) Apply a light coat of engine oil to the O-ring on the crankshaft position sensor.





Text in Illustration





NOTICE:
Make sure that the O-ring is not cracked or does not jump out of position during installation.

(b) Install the crankshaft position sensor with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(c) Connect the crankshaft position sensor connector.

2. INSTALL ELECTRIC INVERTER COMPRESSOR ASSEMBLY

Installation