Removal

2GR-FXE ENGINE CONTROL SYSTEM: HEATED OXYGEN SENSOR: REMOVAL

1. REMOVE FRONT FLOOR COVER LH Removal

2. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

(a) Disconnect the 2 wire harness clamps and heated oxygen sensor connector.





(b) Disconnect the wire harness clamp.





(c) Using SST, remove the heated oxygen sensor from the front No. 3 exhaust pipe.





SST : 09224-00010

3. REMOVE FRONT NO. 3 EXHAUST PIPE SUB-ASSEMBLY Removal

4. REMOVE FRONT EXHAUST PIPE ASSEMBLY Removal

5. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)

(a) Using SST, remove the heated oxygen sensor from the front exhaust pipe.





SST : 09224-00010