Installation

AIR CONDITIONING: BLOWER MOTOR CONTROLLER (for Rear): INSTALLATION

1. INSTALL BLOWER MOTOR CONTROLLER

(a) Install the blower motor controller with the 2 screws.





(b) Connect the connector.

2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH Installation

3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH Installation

4. INSTALL FRONT DECK SIDE TRIM COVER RH Installation

5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Installation

6. INSTALL ROPE HOOK ASSEMBLY (for RH Side) Installation

7. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH Installation

8. INSTALL REAR ROOM TEMPERATURE SENSOR (for Automatic Air Conditioning System) Installation

9. INSTALL SIDE TRIM COVER RH (for Manual Air Conditioning System) Installation

10. INSTALL DECK SIDE TRIM RH Installation

11. INSTALL DECK SIDE TRIM COVER RH Installation

12. INSTALL REAR SEAT SIDE GARNISH CAP Installation

13. INSTALL REAR FLOOR FINISH PLATE Installation

14. INSTALL REAR NO. 2 SEAT ASSEMBLY Installation

15. INSTALL CENTER SEAT CUSHION COVER SUB-ASSEMBLY Installation

16. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH Installation

17. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH Installation

18. INSTALL REAR DECK FLOOR BOX Installation

19. INSTALL REAR MAT Installation

20. INSTALL DECK SIDE TRIM BOX RH Installation

21. INSTALL JACK CARRIER ASSEMBLY Installation

22. INSTALL JACK ASSEMBLY Installation

23. INSTALL JACK CARRIER CUSHION Installation

24. INSTALL JACK CARRIER SUPPORT Installation

25. INSTALL NO. 1 DECK BOARD Installation

26. INSTALL NO. 2 DECK BOARD Installation

27. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY Installation

28. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH Installation

29. INSTALL REAR DOOR SCUFF PLATE RH Installation