Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ECU

(a) Connect the connector to the tire pressure warning ECU.

(b) Install the tire pressure warning ECU with the nut.

Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)

2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation

3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH Installation

5. INSTALL FRONT DOOR SCUFF PLATE RH Installation

6. REGISTER TRANSMITTER ID

Programming and Relearning

7. INSPECT TIRE PRESSURE WARNING SYSTEM

Test Mode Procedure