Installation

BRAKE CONTROL: YAW RATE AND ACCELERATION SENSOR: INSTALLATION

1. INSTALL YAW RATE AND ACCELERATION SENSOR

(a) Install the yaw rate and acceleration sensor with the 2 bolts.





Text in Illustration





Torque : 15 Nm (148 kgf-cm, 11 ft-lbf)

NOTICE:
* Be sure to insert the yaw rate and acceleration sensor claw into the stopper hole while installing the yaw rate and acceleration sensor.
* Do not damage the yaw rate and acceleration sensor.
* Make sure that the yaw rate and acceleration sensor is installed securely.

(b) Connect the connector to the yaw rate and acceleration sensor.

NOTICE:
Make sure that the yaw rate and acceleration sensor connector is connected securely.

2. INSTALL FRONT NO. 2 CONSOLE BOX INSERT Installation

3. INSTALL FRONT NO. 1 CONSOLE BOX INSERT Installation

4. INSTALL CONSOLE BOX ASSEMBLY

Installation

5. PERFORM YAW RATE AND ACCELERATION SENSOR ZERO POINT CALIBRATION

Calibration

6. CHECK FOR YAW RATE SENSOR SIGNAL

Test Mode Procedure